Machine won't switch on Ensure the plug is connected to both the socket and the back of the machine. Ensure that the socket is switched on. A small blue LED on the back of the machine lights up to confirm that the machine has power. Press the on/off button to start (an LED light should come on around the power button). If the machine cuts out or will not switch on, please turn it off at the socket and remove the plug. Wait 10 seconds, plug the machine back in and ensure the socket is switched on. Press the on/off button again to start the machine. The blue LED surrounding the Standby ON/OFF button will flash if the base is not level. The machine will not operate if tilted by over 5°, and the display will show a ‘tilted’ graphic. If the machine has been tilted make sure it is level and clear up any spillage. NB: If the machine is not levelled after 15 minutes, it will switch ’OFF’. For more information about where to position your machine, please use the link below.